New generation computerized paint technology.
	One stop solution for all your painting needs.

No. 1 Premium Acrylic Distemper

Here’s why it’s No. 1 :

• Copolymer emulsion based;
• Smooth finish;
• Fast drying;
• Quick recoatable;
• Clean bright shades.

Area Of Application
Interior surfaces of plaster, Concrete/ Brick Work, Abestos

Product Data

Finish	Smooth & Matt
Supply Viscosity	Smooth paste
Average Coverage Capacity	180 -200 Sq.ft per kg per coat (on primed & puttied smooth surface by brush application) Surface Dry : Within 20 minutes (at 30+/- 10 C & 65+/- 5% R.H)
Interval between coats	3 hour minimum
Thinner recommended	Clean tap / potable water
Primer recommended	For New Plaster – Shalimar Wall Neutralising Cement Primer, For Old Painted surface – Shalimar Water Tinnable Cement Primer, Universal White Primer

Directions For Use

Surface Preparation
Ensure the substrate is dry and free from dirt, dust, grease, oil and loose matter.

Method Of Application
After proper Surface preparation, No. 1 Premium Acrylic Distemper can be applied with Brush/ Spray or Roller. After Application of suitable primer, two or more coats of No.1 Premium Acrylic Distemper to be applied allowing an interval of 3/4 hours between subsequent coats. The dilution ratio with water should be 100:70 by weight.

Shades Available
Choose From a wide range of shades from our shade card.

Packs Available
1 kg/ 2 kg/ 5 kg/ 10 kg/ 20 kg.