New generation computerized paint technology.
	One stop solution for all your painting needs.

Superlac Hi-Gloss Enamel
Superlac Hi-Gloss Enamel is a premium quality Multi-Purpose interior & exterior application. It is fast drying & gives smooth excellent gloss. It also gives excellent leveling properties with a durable protection to the substrate.

Area Of Application
Metal, Wood, Plaster Concrete, Truck/ Bus bodies, Sign board architectural jobs for both exterior and interior surfaces.

Product Data

Finish	Smooth & Fully Glossy
Supply Viscosity	105 +/- 5 seconds (by FC4 at 30 degrees Celsius
Average Coverage Capacity	180 – 210 Sq.ft per litre per coat (on smooth metallic surface by brush application)
DFT per Coat	20 -25 microns (excluding black), 15 - 20 microns (black)
Surface Dry	Within 4 hours (at 30+/-1 degree Celsius & 65+/- 5% R.H
Interval between coats	12 hours minimum
Thinner recommended	Turpsol/ GP Thinner
Primer recommended	Universal White Primer, For Wood – Shalimar Wood Primer, For Ferrous – Shalimar Red Oxide Metal Primer / Shalimar Red Oxide Zinc Chromate Primer / Shalimar Red Lead Primer, For Non – Ferrous : Shalimar Etch Primer, Shalimar Zinc Chromate Primer (Yellow), Plasters & Concrete : Shalimar Wall Neutralising Cement Primer Flash Point : 34 degrees Celsius (by Abel closed)

Directions For Use

Surface Preparation
Ensure the substrate is dry and free from rust, grease, oil and loose matter.

Method Of Application
After proper Surface preparation, Superlac Hi-Gloss Enamel can be applied with Brush/ Spray. For best result apply two coats of Superlac Hi-Gloss Enamel giving 12 hours of drying between coats.

Shades Available
Choose from a wide range of shades from our shade card.

Packs Available
50ml/ 100ml/ 200ml/ 500ml/ 1litre/ 4litre/ 10litre/ 20litre.