1800-103-6509
resources-bg resources-bg

paints that give walls a persona

exquisite

General Purpose Synthetic Enamel

It is a general-purpose industrial synthetic enamel. This is designed essentially for on steel concrete and wooden substrates in normal industrial environment 

Glossy  

The high gloss effect of the product is the best way to give your product a rich sheen

Good Opacity 

Gives high opacity

Long Lasting

 Superior quality primer leads to Long lasting paint film.

Durable Finish

The improved formulation helps provide a uniform film on the surface due to better spreading and coverage 

Available
Pack Sizes
  • 20ltr
Shelf Life
2 YearsFROM THE DATE MANUFACTURING
Colors
Available
1000+ SHADES
Finish
  • Glossy
  • Smooth
Coverage
130-135  SQ.FT/LITRE 
Gloss level
80+/-5 Degree
GH on Tin Plate
Flash point
30 degree   (By Able closed) 

Surface Preparation

  • s-icon

    New Surface to be cured 28 days before painting and free from all waterproofing issues

  • s-icon

    Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking paint, laitance, algae, fungi etc. and wipe it clean

Primer

  • s-icon

    Apply coat of Shalimar Primer depending upon the type of Primer and allow it to dry for 6-8 hrs.

  • Mansonary Surface: Wall neutralizing cement/Universal white primer

  • Ferrous Metal surface: Shalimar red oxide metal primer

  • Non-Ferrous metal surface: Shalimar ETCH primer

  • Wooden surface: Grey primer/ Pink primer/ Universal white primer

  •  Spot prime before and after filling nail holes/cracks.

Putty

  • s-icon

    Level the surface with Shalimar Magic Acrylic Wall Putty or Shalimar Shakti wall guard putty and allow it to dry for 4-6 hrs

  • s-icon

    Sand Surface with 180/320 emery paper and wipe it clean

  • s-icon

    Apply an additional coat depending upon the surface conditions and smoothen the surface

Primer

  • s-icon

    Apply second coat of primer and allow ti to dry for 6-8 hours

  • s-icon

    Sand the surface and wipe it clean.

Top Coat

  • s-icon

    Thin Superlac Hi gloss enamel with shalimar turpsol thinner, 10% to 15% by volume for brush application & 15% to 20% by volume of spray

  • s-icon

    Apply 2-3 coats of Superlac Hi gloss enamel with an interval of 12 hrs (depending upon climate conditions)

  • s-icon

    Application can be done by brush, roller or spray.

Application Surfaces

  • s-icon

    All kind of well-prepared Metal surfaces, Wooden surfaces and masonry surfaces.

exquisiteDownload