QUICK DRYING
GOOD INTER
COAT ADHESION
GOOD
WHITENESS
AND OPACITY
SMOOTH
FINISH
GOOD
COVERAGE
LEAD
FREE
PLASTER: New masonry surface must be allowed to cure completely. it is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING: Ensure the surface is completely free from all dirt, loosely held plaster, powdery resiude, oil grease or any other contamination. Any previos growth of fungus, algae or moss needs to be removed thoroughly by vigorous wire brushing and cleaning with water. It is recommended to take necesssary action to stop the growth of algae, fungus or moss.
FILLING THE CRACKS, HOLES & DENTS: For filling cracks upto 3mm, holes and dents use Shakti wall guard putty.
For surfaces or substrates that are subjected to continuous seepage or dampness, kindly get the repairs done before the application. Moisture
content of the surface should be always less than 12%.
Sand the Surface with enery paper 180 and wipe clean.
In case of spray application a maximum thinner intake of 10-12% is recommended.
Apply the 1st coat of primer and allow it to dry for 3 -4 hours.
Apply the Top coat of primer.
Store in a cool dry place.
Keep away from source of ignition.
Keep container tightly closed, out of children‘s reach and away from foodstuff.
Post Painting Care: Apply recommended Shalimar Paints Interior Emulsion coat over Shalimar Mela Primer