resources-bg resources-bg
shalimar paints weatherpro plus emulsion


Water based super-premium 100% acrylic exterior emulsion with silicon additives to safegaurd walls from extreme weather conditions like rain, humidity and heat. It reflects sun rays to help reduce heat build-up, blocks out damaging ultraviolate rays and prevent algal and fungal formation on walls

All weather protection 

Specially formulated paint gives all weather protection with extra tough and durable paint film

With Silicon Additives 

Silicon additive to safeguard wall from rain, humidity and heat 

Dirt & Dust Resistant 

It has excellent dust & dirt pick up resistance property 

UV Resistant & Sun Reflect Technology 

Good resistance to ultraviolet rays and sun reflect sun rays which helps to reduce heat 

Algal & Fungal Resistant 

Superior in algal and fungal resistance. The formula retards microbial growth on the dried paint film

  • low
  • medium
  • high
  • excellent
Pack Sizes
  • 1ltr
  • 4ltr
  • 10ltr
  • 20ltr
Shelf Life
2000+ SHADES
  • Smooth
  • High sheen
60-70  SQ.FT/LITRE 2 COAT** 
Low Voc
Flash point
As per   IS101/1987 part1, SEC : NA 

Surface Preparation

  • s-icon

    New Surface to be cured 28 days before painting and free from all waterproofing issues

  • s-icon

    Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking paint, laitance, algae, fungi etc. and wipe it clean


  • s-icon

    Apply coat of Shalimar exterior Primer/ Shakti exterior acrylic primer as per recommendation. Allow it to dry for 6-8 hrs

  • s-icon

    Do spot priming before and after filling nail holes/cracks


  • s-icon

    Level the surface with Shalimar Magic Acrylic Wall Putty or Shalimar Shakti wall guard putty and allow it to dry for 4-6 hrs

  • s-icon

    Sand Surface with 180/320 emery paper and wipe it clean

  • s-icon

    Apply an additional coat depending upon the surface conditions and smoothen the surface

Top Coat

  • s-icon

    Thin Weather pro+ emulsion with potable water, 40% to 50% by volume, for dark shade thin with potable water 20-30% by volume.

  • s-icon

    Apply 2-3 coats of WeatherPro+ emulsion with an interval of 4-6 hrs

  • s-icon

    Application can be done by brush, roller or spray.

  • s-icon

    For dark shades require additional 3rd or 4th coats for better hiding and look appearances.

Application Surfaces

  • s-icon

    All kind of well-prepared exterior plasters, concrete and masonry surfaces.

Related Product