Colors
Ideas
Products
Resources
Highlights
Blog
Homeowners
Professionals
Industrial
Payment
Investors
Dealers
Careers
Contact Us
HERO WEATHER GUARD 12
Shalimar Hero Weather Guard 12 is a super luxury exterior paint formulated with advanced hybrid acrylic-PUD emulsion technology, specially designed for long-lasting wall protection. It delivers a rich, luxurious sheen finish with exceptional opacity, ensuring superior coverage and minimizing the need for multiple coats.
Engineered for performance, it comes with a 12-year durability warranty, offering long-term defense against environmental stresses. The formulation provides outstanding resistance to fading and includes heat-reflective properties, helping to reduce surface temperatures by up to 10°C, enhancing comfort and energy efficiency.
Excellent Dpur
Heat Protection Formula
Water Repellent
Luxurious Sheen
12-Year Durability
Excellent Dpur
Heat Protection Formula
Water Repellent
Luxurious Sheen
12-Year Durability
low medium high excellent
-
1ltr -
4ltr -
10ltr -
20ltr
Smooth Sheen
Low Voc
Surface Preparation
New surface must be cured for 28 days before painting and free from all water leakage related issues
-
Ensure the surface is clean, dry, and free from any loose particles, dust, grease, or oil. Growths of algae, fungus and moss should be removed by wire brushing and water followed by application of Bio block. Remove any older coatings using a scraper or wire brush. Ensure surface free from cracks and dents, suitable crack filler should be used.
-
Sand the surface to ensure smoothness and better adhesion.
Primer
-
Apply coat of Hero Interior Exterior Wall Primer by thinning with potable water (1:1 ratio by volume). Allow it to dry for 3-4 hrs. Spot prime before and after filling nail holes / cracks.
Putty (if required)
-
Touch up application can be done with Shalimar Shakti Wall Guard putty followed, entire surface application by putty is not recommended.
Primer
-
Stir Hero Interior Exterior Wall Primer thoroughly before use. Thin it 1:1 by volume with water and apply using a brush or roller. Allow it to dry for 3-4 hrs.
Top Coat
-
Apply 2 coats by diluting 1 lit of Hero Weather guard 12 exterior emulsion with 300ml-400ml of water with the gap of 4-6hrs between two coats. Application can be done by brush or roller. For dark shades, requires additional coats for better hiding and appearance.
Application Surfaces
-
All kinds of well-prepared plaster, concrete, and masonry surfaces.
**Coverage - Actual coverage may vary as coverage depends on method and condition of application as well as surface roughness and porosity.
