New Surface to be cured 28 days before painting and free from all waterproofing issues

Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking paint, laitance, algae, fungi etc. and wipe it clean

Apply coat of Shalimar Primer depending upon the type of Primer and allow it to dry for 6-8 hrs.

Mansonary Surface: Wall neutralizing cement/Universal white primer

Ferrous Metal surface: Shalimar red oxide metal primer

Non-Ferrous metal surface: Shalimar ETCH primer

Wooden surface: Grey primer/ Pink primer/ Universal white primer

 Spot prime before and after filling nail holes/cracks.

Level the surface with Shalimar Magic Acrylic Wall Putty or Shalimar Shakti wall guard putty and allow it to dry for 4-6 hrs

Sand Surface with 180/320 emery paper and wipe it clean

Apply an additional coat depending upon the surface conditions and smoothen the surface

Apply second coat of primer and allow ti to dry for 6-8 hours

Sand the surface and wipe it clean.

Thin Superlac Hi gloss enamel with shalimar turpsol thinner, 10% to 15% by volume for brush application & 15% to 20% by volume of spray

Apply 2-3 coats of Superlac Hi gloss enamel with an interval of 12 hrs (depending upon climate conditions)

Application can be done by brush, roller or spray.

All kind of well-prepared Metal surfaces, Wooden surfaces and masonry surfaces.